In preparation for the panel install I spent some time securing wires and generally tidying it all up. Locking down the transponder antenna The CANBUS terminator on the electric compass and its ground wire were fixed to the bottom skin…
Category: Wiring
Battery
I had set myself the goal of having panel first light up over Thanksgiving so I needed to get the battery to hook it up to. My plan is to get the avionics electrical side all working and then understand…
Seat Pans, Cotter Pins, and Wiring
After some research on the Zenith forums I discovered that the recommended solution for the ill-fitting seat pans is to remove the flanges and trim the side until they fit, and then add l-angles in place of the flanges to…
More Wiring
The days are kinda getting cooler and so I grabbed another couple of hours over the weekend to keep on working with the wires. During the week my 12ft coaxial cable had come so I hooked it up to the…
Some wiring
Finally got round to doing some wiring. I’ve been putting a few cables on the power switches for those items that are mounted in the panel. For others I think I will wait until the panel is in the plane…