Big day today, we’re going to see the rear fuselage frame assembled for the first time. Well, hopefully. Started out by riveting the HT Frames to the bottom skin. Then we clecoed the pilot side skin to the bottom skin…
Month: December 2012
Rear Fuselage Bottom Skin Longerons (2.5h)
Next up we have to drill the bottom longerons to the side skins. To do this we hold the side skin up to the bottom skin and cleco it to the HT frames that have been put back on the…
Rear Fuselage Pilot-side Skin (4.5h)
Today was pretty much the same as the previous day but for the other side skin. The only difference is that first we enlarged the holes for the HT frames in the bottom skin, deburred and primed. After that it…
Rear Fuselage Horizontal Tail Frames (2.5h)
Before taking care of the l-angles on the side skin we fitted the HT frames (it took me many days to work out that HT stood for Horizontal Tail) to the pre-drilled holes so that we could measure and cut…
Rear Fuselage Right-hand Side Skin (4.5h)
Continued with the bottom skin today, removed all the z- and l-angles and deburred holes, primed and then riveted on the skin. If you look carefully we didn’t rivet all the way to the ends of the l-angles because we…