Category: Rudder

Torque Tube and Fins (3 hr)

Allen joined me in the hangar today and our primary goal was to get the torque tube properly installed so that we could get the stop ring on the end of it (if you recall, it won’t go far enough…

Rudder Install (1h 30m)

It was almost four years ago that I started out on this project, with no idea if I had the skills to do it (and still don’t!), and today I got to see those first fruits of my labour mature…

Working at the back (2.5 hr)

The last post ended on a downer but the good news is that I think there is no need to worry as where the two parts of the tail meet there are some washers that should sort the spacing out.…