After the problems with last week’s fuel fitting leaks, I took out the seat channel so that we could inspect the fittings. It was a good job that I did because one of the fittings in the tee that has…
Author: admin
Engine Work – Omnibus Edition
Here are a bunch of things that were done from a few days of working over the holiday period. We are now back to weekends only again. The ignition circuit was finished by first wiring a ground wire to the…
Ignition Switch
Today I spent a little time in the hangar, mostly doing the post-assembly work on a nice new tool chest that my wife gave me. Now when I lose something I’ll at least have the area narrowed down significantly. Beyond…
Passenger Throttle Install
In examining the choke cable install I found out that the pilot side throttle attach point is missing the bolt assembly for holding the cable on. I can’t imagine why I would have removed that but I must have played…
Choke Install
I had Christmas Eve Eve off so Allen and I worked on the choke cable. We had plans to do a lot more but it took a while to work out how the cables attached to thing, the usual thing.…