Here are a bunch of things that were done from a few days of working over the holiday period. We are now back to weekends only again. The ignition circuit was finished by first wiring a ground wire to the…
Category: Engine
Ignition Switch
Today I spent a little time in the hangar, mostly doing the post-assembly work on a nice new tool chest that my wife gave me. Now when I lose something I’ll at least have the area narrowed down significantly. Beyond…
Passenger Throttle Install
In examining the choke cable install I found out that the pilot side throttle attach point is missing the bolt assembly for holding the cable on. I can’t imagine why I would have removed that but I must have played…
Choke Install
I had Christmas Eve Eve off so Allen and I worked on the choke cable. We had plans to do a lot more but it took a while to work out how the cables attached to thing, the usual thing.…
Engine Wiring
The transponder still isn’t working, MGL determined that the panel isn’t able to send to the remote unit but we checked there was continuity pin to pin so I don’t know what could be the problem. I’m hoping Matt at…